Skip to content

107 Camera Bag

$437.00

5 year manufacturers guarantee

In stock

Model Number: 506034-54

Barcode: 5035627113500

Now discontinued. Previously the smallest bag in our 7-Series range. Check out the slightly larger 207 that is still in active production.

While stock lasts!

Select Colour:
Khaki FibreNyte / Chocolate Leather (Olive Lining)
In stock

While stock lasts!

Select Colour:
Khaki FibreNyte / Chocolate Leather

This is What's Included

Multiple layout options inside

Multiple layout options inside


Shown here with the included padded base, the included ‘SuperFlex 9-15’ and the optional ‘V-Bridge 15’ holding the lens attached to the camera up.​ ​

 

There are 20+ different sizes/styles of padded dividers available to customise the bag to your gear:​

  • SuperFlex Partitions​
  • DF Dividers​
  • V-Bridge 15

Press Top Feature

Press Top Feature


The ‘7 series’ (107, 207, 307 & 307L camera bags) have a distinctive rectangular opening feature, comprising of two specially shaped fibreglass and aluminium wands that hold the zipped, main compartment open. This is known as the ‘Billingham Press Top’ feature and is a similar style to a doctors ‘Gladstone’ bag.​ ​

 

The hinge between the wands either side is made of fabric to prevent users experiencing a mechanical failure and provide an easy and quicker opening than a typical doctors bag.

 

Photo from the 307 bag – the styling is the same but the width of the bag is noticeably smaller.

Extra pockets inside

Extra pockets inside


The main compartment is padded on all 4 sides, plus the padded basepad.​ ​

 

Behind the front and back padded walls of the main compartment are slim pockets, ideal for items such as filters or diaries.​ ​

 

The pockets are also big enough to fit an iPad Mini - please note however that these pockets are only padded on one side.

Front pockets

Front pockets


The front dump pockets feature a press stud close and have ample space for batteries, cables, SD cards, lens cloths and any other bits and pieces you wish to carry. An additional loop in the fabric on the side of the front pockets are a deliberate design feature to allow clip on pens.

 

Photo from the 307 bag – the styling is the same but the width of the bag is noticeably smaller.

Rear pocket

Rear pocket


The back pocket of this bag is a generous size and great for storing easily accessible documents or notes. ​ ​

 

The rain flap over the top is made of the same 3-layer waterproof fabric as the rest of the bag to help protect the zip from the elements.

Sculpted top flap

Sculpted top flap


The main flap has a central, double layered, waterproof seam which gives the bag a distinctive rounded look. ​ ​

 

By extending over the ends of the bag, the top flap provides excellent protection from dust and weather, as well as creating a classic, sleek look.

Additional grab handles

Additional grab handles


With the top flap open you'll see another detail that makes all the difference - two internal leather grab handles, that  means you can carry the bag safely without closing it. For extra flexibility the front handle can even be unclipped and removed if required.

 

Photo from the 307 bag – the styling is the same but the width of the bag is noticeably smaller.

Adjustable shoulder sling

Adjustable shoulder sling


The shoulder sling is made of strong woven polyester. You can adjust the length to suit your height and shooting style.​ ​

 

The sling is compatible with the SP20 and SP50 (recommended) shoulder pads.

 

The SP50 (pictured) is included for added comfort.

Delta Sling and Optional Delta Pockets

Delta Sling and Optional Delta Pockets


Where the shoulder sling attaches to the bag it splits into an inverted ‘Y’ shape at each end. This split sling helps to prevent any tipping or rolling motion as you move.​ ​

 

The bottom ends of this split sling is also where optional Delta Pockets can be clipped onto, providing extra space or organization when you need it.​ ​

 

Note: The Delta pocket in the picture is Khaki Canvas / Tan Leather, however all 107 bags are made of FibreNyte fabric.

QRS front straps

QRS front straps


The 107 features flared ‘Quick Release System’ leather front straps. You can open them one handed, even while wearing gloves.​ ​

 

The dual holes in the straps allow you to adjust the amount that the bag expands, depending on how much gear you are carrying.​ ​

 

Below and behind the flared front straps are two cutouts where you can thread optional 5/8 Tripod Straps through.

Brass feet

Brass feet


All of our ‘7 series’ bags (107, 207, 307 and 307L) have brass feet mounted to strong leather corner patches. Together these help prevent wear to the corners of the bag and extend its longevity.

Craftmanship

Craftmanship


  • Made of a 3-layer waterproof material​
  • Real, full-grain, vegetable tanned leather​
  • Solid brass fixings​
  • Individual serial number​
  • 5-year manufacturers guarantee​
  • Made in England
The Bag

External dimensions

W280mm (11") x D210mm (8¼") x H300mm (11⅞")

Internal dimensions

W270mm (10⅝") x D150mm (5⅞") x H220mm (8⅝")

Capacity

7.5 litres (0.26 feet³)

 

Weight

1.61 kgs (3.56 lbs)

 
 
 
 
Pockets
 

5 in addition to the main compartment.

 
 
 
 
Front external dump pockets (x2)

Internal dimensions (individual)

W80mm (3⅛") x D40mm (1½") x H210mm (8¼")

Capacity (individual)

0.75 litres (0.03 feet³)

 
 
Front Internal Pocket Inside Main Compartment

Internal dimensions (individual)

W220mm (8⅝") x D Nominal x H240mm (9½")

This is enough space for an iPad Mini or similar size device.

Capacity (individual)

Nominal

 
 
Rear Internal Pocket Inside Main Compartment

Internal dimensions

W220mm (8⅝") x D Nominal x H240mm (9½")

This is enough space for an iPad Mini or similar size device.

Capacity

Nominal

 
 
Rear zipped pocket

Internal dimensions

W230mm (9") x D Nominal x H170mm (6¾")

Capacity

Nominal

 
 
Shoulder sling

Length

Can be adjusted between 1130mm (44½") to 1610mm (63⅜") approx.

Width

50mm (2")

Compatible with SP20 and SP50 Shoulder Pads. The SP50 Shoulder Pad is included when you purchase the 107.

 
 
SP50 Shoulder Pad (included)

External dimensions

W80mm (3⅛") x D12mm (½") x L255mm (10")

'D' measurement excludes fixings on top

Weight

0.09kg approx (0.2 lbs)

 
 

You can find out sizing for each specific part of the product. Just select a section from the below options to find out more details.

External dimensions

W280mm (11") x D210mm (8¼") x H300mm (11⅞")

Internal dimensions

W270mm (10⅝") x D150mm (5⅞") x H220mm (8⅝")

Capacity

7.5 litres (0.26 feet³)

Weight

1.61 kgs (3.56 lbs)

5 in addition to the main compartment.

Internal dimensions (individual)

W80mm (3⅛") x D40mm (1½") x H210mm (8¼")

Capacity (individual)

0.75 litres (0.03 feet³)

Internal dimensions (individual)

W220mm (8⅝") x D Nominal x H240mm (9½")

This is enough space for an iPad Mini or similar size device.

Capacity (individual)

Nominal

Internal dimensions

W220mm (8⅝") x D Nominal x H240mm (9½")

This is enough space for an iPad Mini or similar size device.

Capacity

Nominal

Internal dimensions

W230mm (9") x D Nominal x H170mm (6¾")

Capacity

Nominal

Length

Can be adjusted between 1130mm (44½") to 1610mm (63⅜") approx.

Width

50mm (2")

Compatible with SP20 and SP50 Shoulder Pads. The SP50 Shoulder Pad is included when you purchase the 107.

External dimensions

W80mm (3⅛") x D12mm (½") x L255mm (10")

'D' measurement excludes fixings on top

Weight

0.09kg approx (0.2 lbs)

DSLR with small-to-medium lens attached. Plus 1 extra lens and flash depending on size.

Mirrorless camera with small-to-medium lens attached. Plus 1 extra lens and flash depending on size.

Two rangefinder cameras (e.g. Leica M10, Leica M6) with lenses attached.

Medium format cameras (Fujifilm GFX 50S, Hasselblad H6D, Hasselblad 500CM etc) with lens attached. Maybe one extra small lens.

Your cart


Your cart is currently empty.

Continue shopping
  • {{ item.final_price | money }}  ({{ item.quantity }})

    {{ item.product_title | pre_title }}

    Size: {{ item.properties['_Size'] }}

    Colour: {{ item.properties['_Colour'] }}