All items ship from the USA! Free USA shipping on orders over $100 via FedEx Express Saver. Made in England since 1973.
$320.00
5 year manufacturers guarantee
Consider adding an SP40 Shoulder Pad!
Model Number: 501502-01
Barcode: 5035627123332
Sitting in the middle of the ‘S’ Series range in terms of size, this camera bag is perfect for mid-sized DSLR or mirrorless camera with two medium or three small lenses. Made in England with 3-layer waterproof fabric and real leather.
S3 Divider Set (Olive) 2x Padded Velcro Dividers
S3 Padded Base (Olive)
The S3 has a removable base and 2 padded Velcro® dividers that can be attached anywhere within the main compartment to create your own layout.
Features a 'Quick Release System' leather front strap which allows for a quick and easy access, simply pull the front strap down-and-off the brass clogball to open.
The simple arrangement inside makes this an easy, practical bag to work from.
Dense padding protects the gear on all 4 sides and the base.
The front dump pocket is great for batteries, cables, lens cloths and SD cards with a press stud close.
A back zip pocket is a useful place to put a map or a small writers pad for making notes on set!
The main compartment has a double zip, giving you the ability to partially open the bag at one end.
The 'S' series (S2, S3 and S4 camera bags) have the 'TukTop' feature. This allows you to tuck the zips behind either side of the main compartment to keep the bag open and zips out of the way when accessing your gear frequently.
Either side of the main compartment, where you tuck the zips, are slim pockets suitable for a travel guide or camera batteries etc.
The shoulder sling is made of shuttle woven polyester and is adjustable in length to suit your height and shooting style.
The sling is compatible with the SP15 and SP40 (recommended) Shoulder Pads – not included.
AVEA 3 or AVEA 5 End Pockets are great add-ons for that little bit of extra storage.
External dimensions
W310mm (12¼") x D150mm (6") x H220mm (8⅝")
Internal dimensions
W270mm (10⅝") x D100mm (4") x H160mm (6¼")
Capacity
4.0 litres (0.14feet³)
Weight
0.80 kgs (1.76 lbs)
4
W260mm (10¼") x DNominal x H160mm (6¼")
This pocket will bow-out a little if needed, increasing the 'D' measurement and therefore capacity.
0.2 litres (0.007 feet³)
W260mm (10¼") x DNominal x H130mm (5¼")
Nominal
W240mm (9½") x D Nominal x W170mm (6¾")
Length
Can be adjusted between 940mm (37") and 1630mm (64⅛") approx.
Width
38mm (1½")
Compatible with SP15 and SP40 (recommended) Shoulder Pads (not included).
You can find out sizing for each specific part of the product. Just select a section from the below options to find out more details.
Small-to-medium Mirrorless Camera (e.g. Fujifilm X-T4, Sony A7IV, Canon RP, Nikon Z7 II etc) with small lens attached and two small spare lenses.
Small-to-medium Canon DSLR on it's side with lens attached (e.g. Canon 5D MkIV or Canon 6D MkII with 24-70mm f2.8 lens) plus a spare small-to-medium lens. Maybe a 3rd lens too depending on size.
Two Leica M cameras on their side with lenses attached, possibly a spare lens too.
Small foldable drones such as Mavid Air 2 or Mavic Mini 2 with space to spare.
Which shoulder pad fits this bag?
The 'SP15' and 'SP40' sizes both fit this bag. The 'SP15' has more grip whereas the 'SP40' has more padding. For most customers we recommend the SP40 shoulder pad.
Remember to select the correct colour for your bag!
Do I need a shoulder pad for this bag?
The shoulder pad isn't essential but can stop the strap from digging into your shoulder if you carrying heavy equipment inside the bag or carrying it for long periods. It can also reduce the chances of the bag slipping off your shoulder if you don't wear it across the body. Remember only the 'SP15' and 'SP40' sizes fit this bag. Buying it with the bag will save the postage cost of buying it separately later.
Does this bag need re-proofing to keep it waterproof?
No. The fabric is made of 3 layers - the middle layer is butyl rubber. Water cannot pass through this butyl rubber layer. As long as you don't get a hole in the fabric or expose it to harsh chemicals (for example in a washing machine) the fabric should remain waterproof for many years. There is no need to apply re-proofing.
What is the difference between 'Canvas' and 'FibreNyte'?
In simple terms ‘Canvas’ or ‘FibreNyte’ refers to top layer of fabric on our bags – the facecloth.
‘Canvas’ is a mix of cotton and polyester. ‘FibreNyte’ refers to our face fabric that is completely synthetic. Canvas is hard wearing, FibreNyte is very hard wearing.
Both fabrics are bonded to a non-wicking polyester backing fabric with a middle layer butyl rubber – this rubber layer makes both fabrics equally (and very) waterproof. Water can’t get through that rubber layer.
Both fabrics have a similar weave - the FibreNyte looks similar to canvas. Canvas is slightly softer to the touch, FibreNyte is slightly rougher to the touch.
People tend to choose Canvas if they want the bag to age gracefully and look vintage over time. This is particularly true of people who choose our ‘Khaki Canvas’ fabric as this looks particularly lovely as it ages.
People tend to choose FibreNyte if they want the bag to look newer for longer or if they are particularly hard on their gear - for example by carrying the bag to work with them every day, doing a lot of hiking or filling it particularly full. If you are buying a black bag it’s particularly worth considering FibreNyte as it will stay looking blacker longer. Also Sage FibreNyte is particularly attractive as a colour – it’s probably the most popular colour among our staff!
Some of your bags have removable padded inserts. Does this bag have a removable padded insert?
No - on this bag the padding is sewn into the walls of the bag. However, the padded dividers are removable (they attach inside with Velcro®).
Can end pockets be attached to this bag?
Yes. AVEA 3 or AVEA 5 end pockets can be attached to this bag.
Will this bag fit an iPad Mini?
Yes - it will fit between the padding of the main compartment and the external walls of the bag (and so only be padded on one side). No customer has reported their iPad getting damaged in this position but adding a small, slim case to the device might be a sensible precaution.
Larger sizes of iPad such as the 9.7", 10.2" and 11" versions will not fit.
Shoulder Pads
SP40 (Black Leather / Nickel Coated Studs)
End Pockets
Black FibreNyte / Black Leather / AVEA 5
Waist Strap Attachment
Black Webbing / Black Leather
Black FibreNyte / Black Leather / AVEA 3
SP15 (Black Leather / Nickel Coated Studs)
50th Anniversary Belt Key Fob
Tan Leather
FindingRange
Review has lots of detailed photos.
Your cart is currently empty.
{{ item.final_price | money }} ({{ item.quantity }})
{{ item.product_title | pre_title }}
Size: {{ item.properties['_Size'] }}
Colour: {{ item.properties['_Colour'] }}