All items ship from the USA! Free USA shipping on orders over $100 via FedEx Express Saver. Made in England since 1973.
$542.00
5 year manufacturers guarantee
Consider adding '5/8' tripod straps!
Model Number: 506234-54
Barcode: 5035627113548
The largest bag in the ‘7-series’ that we currently offer. Featuring a compartment for a 14” MacBook Pro, quick release front straps, ability to add tripod straps and the unique ‘PressTop’ doctors-bag style opening. Ability to carry a DSLR, several lenses, flash and accessories. Made in England with 3-layer waterproof FibreNyte fabric and real leather.
SP50 Shoulder Pad (Chocolate Leather / Antique Studs)
9-15 SuperFlex Partition (Olive)
10-18 SuperFlex Partition (Olive)
V-Bridge '15' (Olive)
'300' SuperFlex Base (Olive)
Multiple layout options inside included inside are:
There are 20+ different sizes/styles of padded dividers available to customise the bag to your gear:
Note: The partitions shown are not the 'SuperFlex 9-15' and 'SuperFlex 10-18 that are included with the bag.
The '7 series' (107, 207, 307 & 307L camera bags) have a distinctive rectangular opening feature, comprising of two specially shaped fibreglass and aluminium wands that hold the zipped, main compartment open. This is known as the 'Billingham Press Top' feature and is a similar style to a doctors 'Gladstone' bag.
The hinge between the wands either side is made of fabric to prevent users experiencing a mechanical failure and provide an easy and quicker opening than a typical doctors bag.
The main compartment is padded on all 4 sides, plus the padded basepad.
Behind the front padded wall of the main compartment are two equally sized slim pockets, ideal for items such as filters and diaries.
Behind the back padded wall of the main compartment is a single slim pocket, big enough for a MacBook Pro 14", MacBook Pro 13" (4th Gen or newer), MacBook Air 13" or 13.6" (3rd Gen or newer), iPad Pro 12.9" or Surface Pro (1-8 & X).
*Pre-2018 we produced this bag with the back pocket being stitched together. After feedback in 2018, we then started producing this bag without the stitching so that you could use this area as an internal pocket. If you have the pre-2018 version, you can carefully unpick the stitching here only to create this pocket as it shouldn't cause any problems elsewhere in the bag. Please do not unpick the stitching at the front of the bag as this will cause the front dump pockets to come undone.
Please note these pockets are padded on one side.
The front dump pockets feature a press stud close and have ample space for batteries, cables, SD cards, lens cloths and any other bits and pieces you wish to carry. An additional loop in the fabric on the side of the front pockets are a deliberate design feature to allow clip on pens.
The back pocket of this bag is a generous size and great for storing easily accessible documents or notes.
The rain flap over the top is made of the same 3-layer waterproof fabric as the rest of the bag to help protect the zip from the elements.
The main flap has a central, double layered, waterproof seam which gives the bag a distinctive rounded look.
By extending over the ends of the bag, the top flap provides excellent protection from dust and weather, as well as creating a classic, sleek look.
With the top flap open you'll see another detail that makes all the difference - two internal leather grab handles, that means you can carry the bag safely without closing it. For extra flexibility the front handle can even be unclipped and removed if required.
The shoulder sling is made of strong woven polyester. You can adjust the length to suit your height and shooting style.
The sling is compatible with the SP20 and SP50 (recommended) shoulder pads.
The SP50 (pictured) is included for added comfort.
Where the shoulder sling attaches to the bag it splits into an inverted 'Y' shape at each end. This split sling helps to prevent any tipping or rolling motion as you move.
The bottom ends of this split sling is also where optional Delta Pockets can be clipped onto, providing extra space or organization when you need it.
Note: The Delta pocket in the picture is Khaki Canvas / Tan Leather, however all 307 bags are made of FibreNyte fabric.
The 307 features flared 'Quick Release System' leather front straps. You can open them one handed, even while wearing gloves.
The dual holes in the straps allow you to adjust the amount that the bag expands, depending on how much gear you are carrying.
Below and behind the flared front straps are two cutouts where you can thread optional 5/8 Tripod Straps through.
External dimensions
W390mm (14⅛") x D210mm (8¼") x H300mm (11⅞")
Internal dimensions (Main Compartment)
W350mm (13¾") x D150mm (5⅞") x H220mm (8⅝")
The 'D' measurement is flexible up to about 170mm (6¾”).
Capacity (Main Compartment)
11.2 litres (0.39 feet³)
Weight
2.01 kgs (4.43lbs)
5 in addition to the main compartment.
Internal dimensions (individual)
W130mm (5⅛") x D60mm (2⅜") x H210mm (8¼")
Capacity
0.75 litres (0.03 feet³)
W140mm (5½") x D Nominal x H240mm (9½")
Nominal
Behind the front padded wall of the main compartment are two equally sized slim pockets, ideal for items such as filters and diaries. These pockets are padded on one side.
Behind the back padded wall of the main compartment is a single slim pocket, big enough for a MacBook Pro 14", MacBook Pro 13" (4th Gen or newer), MacBook Air 13" or 13.6" (3rd Gen or newer), iPad Pro 12.9 or Surface Pro (1-8 & X). This pocket is also only padded on one side.
Internal dimensions
320mm (12⅝") x D Nominal x H170mm (6¾")
Length
Can be adjusted between 1110mm (43¾") to 1610mm (63⅜") approx.
Width
50mm (2")
Compatible with SP20 and SP50 Shoulder Pads. The SP50 Shoulder Pad is included when you purchase the 307.
W80mm (3⅛") x D12mm (½") x L255mm (10")
'D' measurement excludes fixings on top.
0.09kg approx (0.2 lbs)
You can find out sizing for each specific part of the product. Just select a section from the below options to find out more details.
Can fit the MacBook Pro 13 (4th Gen), MacBook Air (3rd Gen), iPad Pro 12.9 or Surface Pro (1-7-X) in its unpadded pocket in the back of the main compartment.
DSLR with a lens attached (e.g. Canon 1DX, Nikon D6, Canon 5D, Nikon D850) plus 1-3 lenses depending on their size. Tall enough for a 70-200mm lens not attached to camera.
Mirrorless camera with a lens attached (e.g. Fujifilm XT-4, Sony A7IV, Canon R6, Nikon Z7 - with or without a battery grip) plus 1-3 lenses depending on their size.
Two rangefinder cameras (e.g. Leica M10, Leica M6) with lenses attached and 4 spare lenses.
Medium format cameras (Fujifilm GFX 100, Hasselblad H6D, Hasselblad 500CM etc) with lens attached and 1-3 extra lenses.
Does this bag need re-proofing to keep it waterproof?
No. All of our bags are made of 3 layers that are bonded together; the outside Canvas or FibreNyte, a middle layer of butyl rubber and the internal lining. It is this middle layer of butyl rubber that prevents water passing through, therefore your bag will not need re-proofing.
We strongly recommend not putting your bag in a washing machine or exposing it to harsh chemicals as this will break down the butyl rubber and therefore the bag will no longer be waterproof.
If you get a hole in the fabric, this can also mean the bag is no longer waterproof and we recommend contacting us as we offer a repair service.
Which shoulder pad fits this bag?
An SP50 Shoulder Pad is already included when you purchase this bag, therefore you only need to buy another if you have lost or damaged yours.
Why is the laptop compartment unpadded?
It isn't a laptop compartment! Apple have just made their latest devices small enough to fit. Please note it definitely won't fit older/larger devices such as the MacBook Pro 13 (3rd Gen) or any 15 inch MacBook. Also the fit is slightly tight - there won't be room to put 13 inch MacBook's in a padded sleeve.
Wikipedia has articles about the MacBook Pro and MacBook Air which should help you identify which device you have (it lists the dimensions!).
Some of your bags have removable padded inserts. Does this bag have a removable padded insert?
No - on this bag the padding is sewn into the walls of the bag. However, the padded dividers are removable (they attach inside with Velcro®).
Why is the internal back pocket in my bag stitched together?
If you have a 307 that was produced pre-2018, you may find that the back pocket is stitched together. After feedback in 2018, we then started producing this bag without the stitching so that you could use this area as an internal pocket. If you have the pre-2018 version, you can carefully unpick the stitching here only to create this pocket as it shouldn't cause any problems elsewhere in the bag. Please do not unpick the stitching at the front of the bag as this will cause the front dump pockets to come undone.
DF Divider
15
SuperFlex Partitions
End Pockets
Khaki FibreNyte / Chocolate Leather / Delta Pocket
V Bridge
Olive / 15
Olive / Flap
Tripod Straps
5/8 / Chocolate Leather
Waist Strap Attachment
Khaki Webbing / Chocolate Leather
50th Anniversary Belt Key Fob
Tan Leather
FindingRange.com
Review by Patrick Leong. Contains lots of extra photos.
Review by Imran
Your cart is currently empty.
{{ item.final_price | money }} ({{ item.quantity }})
{{ item.product_title | pre_title }}
Size: {{ item.properties['_Size'] }}
Colour: {{ item.properties['_Colour'] }}