Skip to content

Padded Inserts

$82.00

5 year manufacturers guarantee

In stock
In stock

Model Number: 520947

Barcode: 5035627110493

Removable, padded inserts for compatible Billingham bags to keep your camera gear protected. Already included when you purchase the bag.

 

A selection of replacement padded inserts for compatible Billingham camera bags. These are supplied with the bags concerned but you can purchase these if you need a replacement or you want multiple inserts to swap out sets of camera gear more quickly. Some people also put them in non-camera bags to add protection inside those.

 

You can find specific information about each insert by clicking on the product in the selector - then viewing the slides below.

 

Please note: The colour of the insert sometimes affects the lining fabric inside. Please look at the table below to find out more.

Designed specifically for the Eventer

Designed specifically for the Eventer


Designed to be a perfect fit for the Eventer bag, with a dedicated laptop slip sewn in.​ ​

 

To identify your bag, check the dimensions or the seams (especially in the front pockets) in the bag for a white batch label that usually has the name of the bag printed on it. Alternatively, contact us if you aren't sure and we can help.

Padded on all internal sides and dividers included.

Padded on all internal sides and dividers included.


The insert is padded with fabric covered closed-cell foam on the front, back, sides and base to give excellent protection to your gear on all sides.​ ​

 

The laptop slip is sewn in as part of the insert, therefore when you remove the insert you also remove the dedicated laptop slip too. ​ ​

 

2x vertical padded dividers and 2x horizontal padded flap dividers are included and attach inside with Velcro®.​ ​

 

Most people use the vertical dividers to create columns for the gear, then use the flap dividers to stack their gear within the columns.

Brushed Nylon lining

Brushed Nylon lining


The inside of the insert is covered with brushed nylon and the Velcro® dividers will attach anywhere inside.

Attaches with pop-clips

Attaches with pop-clips


The insert attaches inside the Eventer with four pop-clips. This enables fast and easy removal.

Included already!

Included already!


This insert is included inside 'Eventer' bags when you purchase the bag.​ ​

 

You only need to purchase this if you are looking for a spare or a replacement. ​ ​ ​

 

A spare can be helpful if you would like to swap out different sets of camera gear more quickly.

Not just for Billingham

Not just for Billingham


This padded insert was designed for our Billingham bags however many customers use them with other bags too and that's ok with us!

Craftmanship

Craftmanship


  • Made of dense, closed-cell foam
  • 5-year manufacturers guarantee
  • Made in England
Insert Colour Originally Supplied in X Colour Bags Inside Fabric Style
Olive All colours not listed below


Brushed Nylon (softer and Velcro® dividers will stick anywhere).

EXCEPT: the 'Hadley Large Pro' insert which is Sheer Polyester with Velcro® strips.
 

Chocolate Burgundy and Navy bags
Brushed Nylon (softer and Velcro® dividers will stick anywhere - supplied like this from late 2016 onwards)
 
Black Grey, Sulphor Yellow and Neon bags
Brushed Nylon (softer and Velcro® dividers will stick anywhere).

EXCEPT: the 'Hadley Large' and 'Hadley Large Pro' insert which is Sheer Polyester with Velcro® strips.
 
Orange Imperial Blue / Tan Leather
Sheer Polyester with Velcro® strips.
 

 

 

External dimensions

W360mm (14¼") x D130mm (5⅛") x H270mm (10⅝")

Internal dimensions

W340mm (13⅜") x D120mm (4¾") x H260mm (10¼")

 

The insert is flexible so can extend slightly deeper front-to-back. 

Capacity

9.24 litres (0.33 feet³)

 

Weight

0.35kg (0.77 lbs)

 
 
 
 

You can find out sizing for each specific part of the product. Just select a section from the below options to find out more details.

External dimensions

W360mm (14¼") x D130mm (5⅛") x H270mm (10⅝")

Internal dimensions

W340mm (13⅜") x D120mm (4¾") x H260mm (10¼")

 

The insert is flexible so can extend slightly deeper front-to-back. 

Capacity

9.24 litres (0.33 feet³)

Weight

0.35kg (0.77 lbs)

Eventer

Yes they all come with removable padded dividers that attach inside with Velcro strips. You get the same dividers that you would get if you bought the bag they were intended for new - so a 'Hadley Pro / Original Insert' comes with a 'Hadley Pro Divider Set' for example.

Not all our bags have padded inserts - for example the 72, Hadley Digital, S2, S3, S4, 550, 225, 335, 445, 555, 107, 207, 307, 307L, f2.8, f1.4, f8, L2, Airline, Pola, Compact, Galbin and some of our other bags have the padding sewn into them. On these bags you don't need a padded insert.

 

An exception to this is that some the bags listed above (such as old 550, 225, 335, 445, System 1 bags etc) didn't have padded linings sewn in when they were first made (imagine the 70s and 80s) - they came with something called a 'SystemFlex Divider Set' which can sometimes get damaged or lost. If you are in this situation we can supply a replacement SystemFlex set or have your bag back to the factory to sew in a padded lining - both these would carry a fee. If you are interested in this please contact us to discuss the costs and options (and include some photos of the inside and outside of your bag!).

If you send us photos of the bag (inside and outside) and dimensions (inside and outside) we should be able to tell you which bag you have and which padded insert (if appropriate) that you need. Contact us here.

Your cart


Your cart is currently empty.

Continue shopping
  • {{ item.final_price | money }}  ({{ item.quantity }})

    {{ item.product_title | pre_title }}

    Size: {{ item.properties['_Size'] }}

    Colour: {{ item.properties['_Colour'] }}