Skip to content

SuperFlex Partitions

$34.00

5 year manufacturers guarantee

In stock
In stock

Model Number: 524001

Barcode: 5035627116020

Create your own layout and keep your bag organised by storing items safely in these SuperFlex Partitions. Available in a variety of sizes and compatible with our 5-series and 7-series bags.

 

 

Use SuperFlex Partitions to create a layout that works for you and keeps your equipment safe. We recommend choosing the size that fits your equipment, rather than what is originally included with the bag. ​​ ​

 

All partitions are 15cm (5⅞") front-to-back, but differ in width and height. 

 

Designed to fit 225*, 335, 445, 555, 550, 107, 207, 307 and 307L bags but some sizes can be used in niche scenarios in our other bags too.

 

See the table further down the page to check sizes.

 

Please note:

- The size names of the Partitions were revised a few years ago therefore please double check the sizes before purchase.

- *21cm tall dividers won't fit in a 225 - they are too tall for it.

 

8-15 Dimensions

8-15 Dimensions


The 8-15 SuperFlex Partition is 8cm (3⅛") in width, 15cm (5⅞") in height and 15cm (5⅞") front-to-back.​ ​

 

The area inside the partition is split up into two areas:​

  • The first is 8cm (3⅛") x 8cm (3⅛"). The height is 15cm (5⅞").​
  • The second is 8cm (3⅛") x 7cm (2¾"). The height is 15cm (5⅞").​ ​

 

When choosing the correct SuperFlex it is important to remember that the walls and the partitions have a little flexibility so may fit lenses slightly wider than you expect if you are happy with a snug fit. ​ ​

 

Please note: All SuperFlex Partitions are 15cm (5⅞") front-to-back.

Attach using Velcro®

Attach using Velcro®


All SuperFlex partitions attach using the Velcro® strips that are inside the 5-series, 7-series and 550 bags.

 

The latest bags have two Velcro® strips on the inside walls, whereas older models have only one strip of Velcro®. SuperFlex partitions should still attach using only one Velcro® strip you may just need to push down as you secure the partition.

 

Some of our very old bags don't have this Velcro® sewn in, contact us if you need advice on this. 

Design

Design


Each Superflex Partition is 15cm (5⅞") front to back with a sewn in partition at varying measurements.​ ​

 

SuperFlex Partitions do NOT have a base in them, as they are designed to be used in conjunction with the SuperFlex base.​ ​

 

SuperFlex partitions allow you to keep equipment neat and tidy in our larger bags, whilst keeping your equipment protected.​ ​

 

You can store many items in SuperFlex partitions, from lenses and camera bodies to flashguns and cables.

What it fits

What it fits


First section 8cm (3⅛") x 8cm (3⅛"):

 

Most small-to-medium lenses will fit in this space.

 

The space is designed to fit lenses that are 8cm (3⅛") wide or less. Slightly wider lenses – for example up to 9cm (3½") can also be stored but will be a tighter fit.

 

 

Second section 8cm (3⅛") x 7cm (2¾"):

 

The space is designed to fit lenses that are 7cm (2¾") wide or less. Slightly wider lenses – for example up to 8cm (3⅛") can also be stored but will be a tighter fit. 

 

Alternatively, a small camera body – such as a Leica M10. Depending on the thickness of the camera body you may be able to attach a very small pancake lens.

Padding

Padding


Whilst the padding may not look very thick, the SuperFlex Partitions are made of dense, closed-cell foam that provides a high level of protection.

 

In response to customer feedback and when new foam became available, SuperFlex Partitions were updated to newer foam that has significantly greater robustness and longevity.

 

The foam is also now covered in PU coated polyester material, instead of the cotton fabric previously. This makes the Partition lighter and prevents adding unwanted, additional weight to your bag.

'Billingham England' label

'Billingham England' label


SuperFlex Partitions that are included with a bag as standard, will not have a Billingham label sewn in.​ ​

 

Accessories that are purchased on their own/separately will have a Billingham label sewn in. ​ ​

 

Translated for our Chinese customers: 由于白金汉(Billingham)的摄影包产品上均缝制带有'Billingham England'字样的标签,随包标配的内胆包或配件上并不单独缝制此标签,另购件除外。).

Craftmanship

Craftmanship


  • Made of dense, closed-cell foam
  • 5-year manufacturers guarantee
  • Made in England

COLOUR TABLE

 

Partition Colour Matches the inside of:
Olive


- Khaki Canvas / Tan Leather
- Khaki FibreNyte / Tan Leather
- Khaki FibreNyte / Chocolate Leather
- Black Canvas / Black Leather
- Black Canvas / Tan Leather
- Black FibreNyte / Black Leather
- Black FibreNyte / Tan Leather
- Sage FibreNyte / Tan Leather
- Sage FibreNyte / Chocolate Leather
- Most of the other other colour combinations we have offered over the years.
 

Orange
- Imperial Blue Canvas / Tan Leather
 
Black
- Grey Canvas / Black Leather
- Neon Yellow / Black Leather*
- Neon Orange / Black Leather*
- Neon Red / Black Leather*
 
Chocolate
- Burgundy Canvas / Chocolate Leather*
- Navy Canvas / Chocolate Leather*
 

*The 550, 5-series and 7-series bags (which these dividers are designed to fit) were never released in these colours.

 

External dimensions

Width: 8cm (3⅛”)

Front-to-back: 15cm (5⅞")

Height: 15cm (5⅞")

 
 
 
 
 

Dimensions of first section

Width: 8cm (3⅛”)

Front-to-back: 8cm (3⅛”)

Height: 15cm (5⅞")

Dimensions of second section

Width: 8cm (3⅛”)

Front-to-back: 7cm (2¾")

Height: 15cm (5⅞")

 
 

You can find out sizing for each specific part of the product. Just select a section from the below options to find out more details.

External dimensions

Width: 8cm (3⅛”)

Front-to-back: 15cm (5⅞")

Height: 15cm (5⅞")

Dimensions of first section

Width: 8cm (3⅛”)

Front-to-back: 8cm (3⅛”)

Height: 15cm (5⅞")

Dimensions of second section

Width: 8cm (3⅛”)

Front-to-back: 7cm (2¾")

Height: 15cm (5⅞")

 

SIZE TABLE

 

The grey images are a 'top-down' view of the SuperFlex Partitions. The white images are the view along the shortest side - so you can understand the height. All partitions are 15cm (5⅞") front-to-back

SuperFlex diagram

225

335

445

555

550

107

207

307

307L

All the sizes listed should fit any 550, 5-series (225, 335, 445555) or 7-series 107, 207, 307, 307L) bag. The exception being some of the taller ones won't fit in the smaller (less tall) sized bags like the 225.

 

You should choose which Partition you want based on the lens/gear that you intend to put in it. For example with a lens that is 10cm wide and 18cm long:

 

  • Would be a perfect fit in a '10-18' size
  • Could be squeezed into a '9-18' if you wanted (it would just push the sides out slightly and create a tighter fit).
  • An '8-18' would probably be too tight.
  • An '10-15' would be too short - the lens would peak over the top.
  • A '10-21' would be an option if you didn't want the lens to reach all the way to the top but certainly wouldn't fit the shorter (less tall) bags such as a 225.

 

 

To help you decode the size names - on a '10-18' size:

 

  • '10' refers to the width - 10cm wide. It also refers to the 'square' side of the Superflex Partition - 10cm x 10cm (when viewed from above). A 10cm x 10cm area would be idea for a lens with diameter or 10cm or less in this example.
  • 18 refers to the height - 18cm.
  • The depth (front-to-back) is always 15cm regardless of the size name.

 

Also remember to use the diagram above to understand the sizes. The grey images are a 'top-down' view. The white images are the view along the shortest side - so you can understand the height. Clicking the different size names at the top will also show you a diagram of that particular size about a 3rd of the way down the page.

 

P.S. 1cm = 10mm = approximately 0.39 inches. 

Most of the sizes will fit in most of our bags - but they aren't designed for that. You might be best looking at the dividers sets specially designed for specific bags here.

No - the base for these dividers is the padded base of the bag itself. If you have lost your padded base you can buy a replacement here.

These have Velcro® at each end to attach to the inside of the bag - this attaches to the Velcro® in the sides of the bag.

 

If you don't have Velcro® inside your bag (and some of our very old bags don't) then on most old bags we can sew in a padded lining for you along with Velcro® strips - we charge a fee for this and you'd need to send us the bag. To find out more please contact us.

 

If you don't have Velcro® in the walls of your bag another option is a SystemFlex Divider Set (the type originally supplied with the bags). If you contact us at the link above we sell you one however we don't currently list them on our website (we don't like them as much as SuperFlexes!).

Yes! Take a look at our DF Dividers here. The '15-15' size mentioned on that page is the right size to reach from the front to the back of any any 550, 5-series (225, 335, 445555) or 7-series 107, 207, 307, 307L) bag - 15cm, just like the SuperFlexes are.

We tend to recommend that you put your lenses and Speedlights/Flashes in the SuperFlex Partitions. We then tend to recommend that you put your camera (with or without a lens attached) in the negative space left between the SuperFlex Partitions. We don't make sizes to fit the cameras themselves - although obviously small cameras such as rangefinders with pancake lenses will fit inside some of them.

Our official retailers are welcome to order them (some through us and others through distributors) but most avoid doing so as they are more niche than our big sellers - such as the camera bags and shoulder pads. Also there are a few retailers who do stock some sizes and not others.

 

You may find if you ask nicely that the retailer will order them for you with their next order from us - although this is likely to be slower than ordering from us directly.

 

 

Your cart


Your cart is currently empty.

Continue shopping
  • {{ item.final_price | money }}  ({{ item.quantity }})

    {{ item.product_title | pre_title }}

    Size: {{ item.properties['_Size'] }}

    Colour: {{ item.properties['_Colour'] }}