Skip to content

Padded Inserts

$93.00

5 year manufacturers guarantee

In stock
In stock

Model Number: 522547

Barcode: 5035627112855

Removable, padded inserts for compatible Billingham bags to keep your camera gear protected. Already included when you purchase the bag.

 

A selection of replacement padded inserts for compatible Billingham camera bags. These are supplied with the bags concerned but you can purchase these if you need a replacement or you want multiple inserts to swap out sets of camera gear more quickly. Some people also put them in non-camera bags to add protection inside those.

 

You can find specific information about each insert by clicking on the product in the selector - then viewing the slides below.

 

Please note: The colour of the insert sometimes affects the lining fabric inside. Please look at the table below to find out more.

Designed to fit the 25 Rucksack

Designed to fit the 25 Rucksack


Designed to be a perfect replacement for padding the 25 Rucksack.

Padded on all four sides and dividers included

Padded on all four sides and dividers included


The padded insert is constructed from a single long piece of foam that coils round to protect your equipment on the top, bottom and both sides.

 

Additionally, an extra removable padded base is supplied at the bottom, this is reinforced with wood.​ ​

 

2x long padded dividers and 2x short padded dividers are included and attach inside with Velcro®.​ ​

 

Please note: This insert is unpadded at the front and back, it needs the padding already sewn into the bag itself for all-round protection.

Available in three colours

Available in three colours


Available in Olive, Black and Chocolate.

 

Remember to pick the correct colour to match the inside lining of your bag.​ ​

Included already!

Included already!


This insert is included inside the '25 Rucksack' bag when you purchase it.​ ​

 

You only need to purchase this if you are looking for a replacement.

Fits both 25 Rucksacks

Fits both 25 Rucksacks


The 25 Rucksack was a bag we originally made to celebrate our 25th anniversary. ​ 

 

In 2016 we have re-released the bag with an updated design.​ ​

 

This insert fits both designs however it is only an exact match for the 2016 (and onwards) design.

Please note

Please note


Unlike our other padded inserts this insert is extremely unlikely to be a good fit for non-Billingham bags, especially as it is unpadded at the front and back.

Craftmanship

Craftmanship


  • Made of dense, closed-cell foam
  • 5-year manufacturers guarantee
  • Made in England
Insert Colour Originally Supplied in X Colour Bags Inside Fabric Style
Olive All colours not listed below


Brushed Nylon (softer and Velcro® dividers will stick anywhere).

EXCEPT: the 'Hadley Large Pro' insert which is Sheer Polyester with Velcro® strips.
 

Chocolate Burgundy and Navy bags
Brushed Nylon (softer and Velcro® dividers will stick anywhere - supplied like this from late 2016 onwards)
 
Black Grey, Sulphor Yellow and Neon bags
Brushed Nylon (softer and Velcro® dividers will stick anywhere).

EXCEPT: the 'Hadley Large' and 'Hadley Large Pro' insert which is Sheer Polyester with Velcro® strips.
 
Orange Imperial Blue / Tan Leather
Sheer Polyester with Velcro® strips.
 

 

 

Weight

0.47kg (1.04 lbs)

 
 
 
 

You can find out sizing for each specific part of the product. Just select a section from the below options to find out more details.

Weight

0.47kg (1.04 lbs)

25 Rucksack

Yes they all come with removable padded dividers that attach inside with Velcro strips. You get the same dividers that you would get if you bought the bag they were intended for new - so a 'Hadley Pro / Original Insert' comes with a 'Hadley Pro Divider Set' for example.

Not all our bags have padded inserts - for example the 72, Hadley Digital, S2, S3, S4, 550, 225, 335, 445, 555, 107, 207, 307, 307L, f2.8, f1.4, f8, L2, Airline, Pola, Compact, Galbin and some of our other bags have the padding sewn into them. On these bags you don't need a padded insert.

 

An exception to this is that some the bags listed above (such as old 550, 225, 335, 445, System 1 bags etc) didn't have padded linings sewn in when they were first made (imagine the 70s and 80s) - they came with something called a 'SystemFlex Divider Set' which can sometimes get damaged or lost. If you are in this situation we can supply a replacement SystemFlex set or have your bag back to the factory to sew in a padded lining - both these would carry a fee. If you are interested in this please contact us to discuss the costs and options (and include some photos of the inside and outside of your bag!).

If you send us photos of the bag (inside and outside) and dimensions (inside and outside) we should be able to tell you which bag you have and which padded insert (if appropriate) that you need. Contact us here.

Your cart


Your cart is currently empty.

Continue shopping
  • {{ item.final_price | money }}  ({{ item.quantity }})

    {{ item.product_title | pre_title }}

    Size: {{ item.properties['_Size'] }}

    Colour: {{ item.properties['_Colour'] }}