Skip to content

Padded Inserts

$54.00

5 year manufacturers guarantee

In stock
In stock

Model Number: 522247

Barcode: 5035627118208

Removable, padded inserts for compatible Billingham bags to keep your camera gear protected. Already included when you purchase the bag.

 

A selection of replacement padded inserts for compatible Billingham camera bags. These are supplied with the bags concerned but you can purchase these if you need a replacement or you want multiple inserts to swap out sets of camera gear more quickly. Some people also put them in non-camera bags to add protection inside those.

 

You can find specific information about each insert by clicking on the product in the selector - then viewing the slides below.

 

Please note: The colour of the insert sometimes affects the lining fabric inside. Please look at the table below to find out more.

Padded Half Insert for Hadley One

Padded Half Insert for Hadley One


This is the Half Insert that is included when you purchase the Hadley One camera bag.​ ​

 

The Hadley One Half Insert is the full height of the main compartment, but only half the width, leaving space for other items.

 

​You can use two of these at once if you wish (shown on the next slide).

Padded on all six sides and dividers included

Padded on all six sides and dividers included


The insert is padded with fabric covered, closed-cell foam on the front, back, sides, base and lid to give excellent protection to your gear on all sides.​ ​

 

1x horizontal padded flap divider is included and it attaches inside with Velcro®.

Two half inserts can be used side by side

Two half inserts can be used side by side


Shown here with two half dividers side-by-side.​

 

​The arrangement of the press studs inside the bag means that, with two half inserts placed side-by-side, one must face forward and the other backwards (as shown) to be secured properly.

 

Remember one Half Insert is included with the Hadley One bag itself! If you want two padded Half Inserts you only need to purchase one separately to have two in total.

Available in two colours

Available in two colours


Remember to pick the correct colour to match the inside lining of your bag.

Attaches with a press stud

Attaches with a press stud


The insert attaches inside the Hadley One with a simple press stud

Included already!

Included already!


This insert is included inside the Hadley One.

Not just for Billingham

Not just for Billingham


This padded insert was designed for use with a Billingham bag many customers use them with other bags too and that's ok with us!

Optional Hadley One Full Insert

Optional Hadley One Full Insert


If you would prefer one complete insert that fills the main compartment, the 'Hadley One Full Size Insert' is available to purchase as an optional extra. ​ ​

 

This is the full height and the full width of the bag. You can't use it at the same time as this 'Half Size Insert'.

Craftmanship

Craftmanship


  • Made of dense, closed-cell foam
  • 5-year manufacturers guarantee
  • Made in England
Insert Colour Originally Supplied in X Colour Bags Inside Fabric Style
Olive All colours not listed below


Brushed Nylon (softer and Velcro® dividers will stick anywhere).

EXCEPT: the 'Hadley Large Pro' insert which is Sheer Polyester with Velcro® strips.
 

Chocolate Burgundy and Navy bags
Brushed Nylon (softer and Velcro® dividers will stick anywhere - supplied like this from late 2016 onwards)
 
Black Grey, Sulphor Yellow and Neon bags
Brushed Nylon (softer and Velcro® dividers will stick anywhere).

EXCEPT: the 'Hadley Large' and 'Hadley Large Pro' insert which is Sheer Polyester with Velcro® strips.
 
Orange Imperial Blue / Tan Leather
Sheer Polyester with Velcro® strips.
 

 

 

External Dimensions

W170mm (6¾") x D130mm (5⅛") X H240mm (9½")

Internal Dimensions

W150mm (6") x D120mm (4¾") x H230mm (9⅛")

This insert is flexible so can accommodate items slightly larger than these dimensions suggest.

Capacity

3.9 litres approx (0.14 feet³)

 

Weight

0.15kg (0.33 lbs)

 
 
 
 

You can find out sizing for each specific part of the product. Just select a section from the below options to find out more details.

External Dimensions

W170mm (6¾") x D130mm (5⅛") X H240mm (9½")

Internal Dimensions

W150mm (6") x D120mm (4¾") x H230mm (9⅛")

This insert is flexible so can accommodate items slightly larger than these dimensions suggest.

Capacity

3.9 litres approx (0.14 feet³)

Weight

0.15kg (0.33 lbs)

Hadley One

Yes they all come with removable padded dividers that attach inside with Velcro strips. You get the same dividers that you would get if you bought the bag they were intended for new - so a 'Hadley Pro / Original Insert' comes with a 'Hadley Pro Divider Set' for example.

Not all our bags have padded inserts - for example the 72, Hadley Digital, S2, S3, S4, 550, 225, 335, 445, 555, 107, 207, 307, 307L, f2.8, f1.4, f8, L2, Airline, Pola, Compact, Galbin and some of our other bags have the padding sewn into them. On these bags you don't need a padded insert.

 

An exception to this is that some the bags listed above (such as old 550, 225, 335, 445, System 1 bags etc) didn't have padded linings sewn in when they were first made (imagine the 70s and 80s) - they came with something called a 'SystemFlex Divider Set' which can sometimes get damaged or lost. If you are in this situation we can supply a replacement SystemFlex set or have your bag back to the factory to sew in a padded lining - both these would carry a fee. If you are interested in this please contact us to discuss the costs and options (and include some photos of the inside and outside of your bag!).

If you send us photos of the bag (inside and outside) and dimensions (inside and outside) we should be able to tell you which bag you have and which padded insert (if appropriate) that you need. Contact us here.

Your cart


Your cart is currently empty.

Continue shopping
  • {{ item.final_price | money }}  ({{ item.quantity }})

    {{ item.product_title | pre_title }}

    Size: {{ item.properties['_Size'] }}

    Colour: {{ item.properties['_Colour'] }}