Skip to content

Padded Inserts

$82.00

5 year manufacturers guarantee

In stock
In stock

Model Number: 5202007

Barcode: 5035627121963

Removable, padded inserts for compatible Billingham bags to keep your camera gear protected. Already included when you purchase the bag.

 

A selection of replacement padded inserts for compatible Billingham camera bags. These are supplied with the bags concerned but you can purchase these if you need a replacement or you want multiple inserts to swap out sets of camera gear more quickly. Some people also put them in non-camera bags to add protection inside those.

 

You can find specific information about each insert by clicking on the product in the selector - then viewing the slides below.

 

Please note: The colour of the insert sometimes affects the lining fabric inside. Please look at the table below to find out more.

Designed to fit the Eventer MKII

Designed to fit the Eventer MKII


Specially designed to fit the Eventer MKII – but will also fit the previous Eventer.

 

The insert is made of fabric covered closed-cell foam. It is padded on the front, back, sides and base.

 

A dedicated laptop slip is sewn in to the back of this insert, capable of holding up to a 14" device - for example a 14" MacBook Pro (2021), 13" MacBook Pro/Air, Surface Pro 8, 13.5" Surface Laptop 3, 13.5" Surface Laptop 4, ThinkPad X1 Carbon Gen 10 (14") etc.
 

Includes Dividers

Includes Dividers


The Eventer MKII Divider Set is included with the padded insert.

 

The divider set consists of 2x vertical large dividers and 2x small flap dividers. The vertical dividers can be used to split the space available into up to three columns. The flap dividers can be used to stack camera gear within those columns (the flap dividers only have Velcro® at one end).

 

The dividers are, of course, removable and repositionable.
 

Available in two colours

Available in two colours


This insert is available in Olive or Chocolate colour, to match the internal lining of your bag.

Attaches with press studs

Attaches with press studs


The insert attaches inside the Eventer/Eventer MKII bag with four press studs; two at the back and two at the front on the inside walls of the bag. This enables fast and easy removal.

Included already

Included already


This insert is included when you purchase the Eventer MKII.

 

You only need to purchase this if you are looking for a spare or a replacement.

 

A spare can be helpful if you would like to swap out different sets of camera gear more quickly.

Not just for Billingham

Not just for Billingham


This padded insert was designed for our Billingham bags however many customers use them with other bags too and that's OK with us!

Double check compatibility

Double check compatibility


To purchase the correct replacement insert for your bag you must correctly identify which bag you have – be careful as sometimes they look very similar to each other!

 

To identify your bag do one of the following:

  • Check the dimensions inside you current bag.
  • Look for a little white label sewn into the seams of the bag or under the flap of the front pockets. That label will usually have the name or model number of the bag printed on it. The model number and name are usually on the underside of the label. 

 

Alternatively, contact us if you aren't sure and we can help.

Flexible

Flexible


The padded insert is a little flexible to match the bag, especially front to back therefore it can fit items slightly larger than the dimensions suggest.

 

Please note however as the Eventer MKII has a zip on the main compartment, this will restrict this bowing out somewhat.

Eventer Vs Eventer MKII Insert

Eventer Vs Eventer MKII Insert


The Eventer MKII insert has slightly deeper padding on the base compared to the previous Eventer insert.

Craftmanship

Craftmanship


  • Made of dense, closed-cell foam
  • Five year manufacturers guarantee
  • Made in England
Insert Colour Originally Supplied in X Colour Bags Inside Fabric Style
Olive All colours not listed below


Brushed Nylon (softer and Velcro® dividers will stick anywhere).

EXCEPT: the 'Hadley Large Pro' insert which is Sheer Polyester with Velcro® strips.
 

Chocolate Burgundy and Navy bags
Brushed Nylon (softer and Velcro® dividers will stick anywhere - supplied like this from late 2016 onwards)
 
Black Grey, Sulphor Yellow and Neon bags
Brushed Nylon (softer and Velcro® dividers will stick anywhere).

EXCEPT: the 'Hadley Large' and 'Hadley Large Pro' insert which is Sheer Polyester with Velcro® strips.
 
Orange Imperial Blue / Tan Leather
Sheer Polyester with Velcro® strips.
 

Please note: Not every bag has every colour of insert available.

The Eventer Insert

External dimensions

W360mm (14¼") x D130mm (5⅛") x H270mm (10⅝")

Internal dimensions

W340mm (13⅜") x D120mm (4¾") x H260mm (10¼")

 

The insert is flexible so can extend slightly deeper front-to-back. 

Capacity

9.24 litres (0.33 feet³)

 

Weight

0.39kg (0.85 lbs)

 
 
 
 

You can find out sizing for each specific part of the product. Just select a section from the below options to find out more details.

External dimensions

W360mm (14¼") x D130mm (5⅛") x H270mm (10⅝")

Internal dimensions

W340mm (13⅜") x D120mm (4¾") x H260mm (10¼")

 

The insert is flexible so can extend slightly deeper front-to-back. 

Capacity

9.24 litres (0.33 feet³)

Weight

0.39kg (0.85 lbs)

Eventer

Eventer MKII

Yes, when you purchase a padded insert it includes a divider set

Not all of our bags have padded inserts - for example the 72, Hadley Digital, S2, S3, S4, 550, 225, 335, 445, 555, 107, 207, 307, 307L, f2.8, f1.4, f8, L2, Airline, Pola, Compact, Galbin and some of our other bags have the padding sewn into them. On these bags you don't need a padded insert.

 

An exception to this is that some the bags listed above (such as old 550, 225, 335, 445, System 1 bags etc) didn't have padded linings sewn in when they were first made (imagine the 70s and 80s) - they came with something called a 'SystemFlex Divider Set' which can sometimes get damaged or lost. If you are in this situation we can supply a replacement SystemFlex set or have your bag back to the factory to sew in a padded lining - both these would carry a fee. If you are interested in this please contact us to discuss the costs and options (and include some photos of the inside and outside of your bag!).

If you send us photos of the bag (inside and outside) and dimensions (inside and outside) we should be able to tell you which bag you have and which padded insert, if necessary, that you need. Contact us here.

Your cart


Your cart is currently empty.

Continue shopping
  • {{ item.final_price | money }}  ({{ item.quantity }})

    {{ item.product_title | pre_title }}

    Size: {{ item.properties['_Size'] }}

    Colour: {{ item.properties['_Colour'] }}